50 lb Single Axis Linear Stepper Forcer,a linear motor,product,STS-5030-A4
50 lb Single Axis Linear Stepper Forcer, STS-5030-A4
3D Cube
The STS-5030-A4 is a 4-phase single axis linear stepper motor that generates a continuous force of 50.0 lbs [222 N]. Integral air bearings are used to maintain the required motor air gap. 60 PSI of filtered compressed air should be supplied by the customer. It does not come supplied with precision roller bearings to guide it along the platen. These can be added as a custom option. The customer may also supply their own bearing guidance system. Power is supplied to the motor via a 25-pin D-Sub Male connector. There are mounting holes on top of the forcer to allow for payload mounting.  Baldor Motors P/N LMSS2508-2WW0 or LMSS2508-4AA1. Spec #: SQ0057A00.

This forcer is designed to operate on a 2.95" [74.9 mm] wide, 0.96" [24.3 mm] thick bar platen. Platen Model #: STP-30-XXX-A.

To determine your motion profile needs, use our linear motion calculator.

Bearing TypeAir
Forcer Mass2.4 lbs1100 grams
Platen Mass0.90 lbs/in16.0 grams/mm
# of Phases4
Resistance @ 20C4.6 ohms
Inductance @ 20C3.0 mH
Electrical Time Constant0.65 msec
Force50.0 lbs222 N
Current4.0 amps
Forcer Length8.75 in222.3 mm
Forcer Width3.44 in87.4 mm
Forcer Height1.33 in33.66 mm
Product Drawing

Request A Quote

First Name
Last Name
Quantity Required:
Product to Quote:
Comments & Special Instructions: