Dual Rail Stage - DRS-080-08-013-01-EX

Dual Rail Stage,a linear motor,product,DRS-080-08-013-01-EX

The DRS-080-08-013-01-EX dual rail positioning stage is ideal for applications that require long travel distances. It uses a brushless linear motor to generate a continuous/peak force of 10.2 lbs [45.6 N]/30.7 lbs [137 N] with a total stroke length of 80.5 in [2044.7 mm]. The non-contact 1.0-micron resolution encoder allows for precise positioning. It is guided by dual rigid recirculating ball linear bearings. The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system and easily allowing for long strokes. There are also provisions that allow customer cables to be routed within the cable carrier. It has end-of-travel rubber bumper stops. A home positioning sensor, end-of-travel-sensors, protective bellows covers, and custom mounting holes on the moving table are available upon request.

For smaller cross-section, lighter weight brushless linear motor driven positioning stages. Please see our SR Positioning Stages.

To determine your motion profile needs, use our linear motion calculator.

Motor P/N	BLDM-B12
Stroke	80.5 in	2044.7 mm
Encoder Resolution	1 micron
Bearing Type	Recirculating Ball
Moving Mass	5.0 lbs	2.26 kg
Total Mass	95 lbs	43 kg
Resistance @ 20C	8.4 ohms
Inductance @ 20C	5.0 mH
Electrical Time Constant	1 msec
Motor Constant	2.21 lbs/√watt	9.8 N/√watt
Force Constant	6.4 lbs/amp	28.5 N/amp
Back EMF	0.72 V/ips	28.5 V/m/sec
Force @ 100% Duty	10.2 lbs	45.6 N
Power @ 100% Duty	21.5 watts
Current @ 100% Duty	1.6 amps
Force @ 10% Duty	30.7 lbs	137 N
Power @ 10% Duty	194 watts
Current @ 10% Duty	4.8 amps
Stage Length	93.0 in	2362 mm
Stage Width	10.32 in	262 mm
Stage Height	3.96 in	101 mm

Product Drawing

Request A Quote

First Name

Last Name

Company

Phone

Quantity Required:

Product to Quote:

Comments & Special Instructions: