This hybrid air bearing XZ positioning system uses H2W air bearing linear stepper motor STS-1220-AP4T (horizontal axis) and voice coil positioning stage VCS05-060-LB-01-MH (vertical Z-axis). The horizontal Air Bearing Linear Stepper motor has a 38.0 in [965 mm] stroke and generates 12.0 lbs [53.1 N] of continuous force. It is guided by precision roller bearings along the platen. Integral air bearings are used to maintain the required motor air gap. The vertical Z-axis motor has a 0.50 in [12.1mm] stroke; generates 6.0 lbs [26.7 N] of continuous force and 118.0 lbs [80.1 N] of peak force. The 1.0-micron resolution encoder allows for precise closed loop positioning. It comes supplied with bearings that allow smooth and rigid motion. The motor coil is the moving part of the assembly in order to reduce the moving mass of the axis.
- Wall mountable
- Two axis of coordinated motion
- Cable carriers to route payload cables